1. The antenna under the mechanical adjustment Angle 0 ° ~ 15 °, horizontal azimuth Angle can be arbitrary adjustment;

2. Hot dip galvanized processing rod body, then apply the simulation tree bark appearance, which can effectively improve the aesthetic and KangFuXing can;

3. The rod body overall performance according to the grade 12 wind resistant design wind resistance;

4. Branches made of flame retardant insulation material not less than 13 layers, each layer of no less than 4 branch. 15 m bionic tower bottom branches from the ground 5.3 m, each layer of 1.2 m interval; 20 m bionic tower bottom is apart from the ground 6.9 m, each layer interval 1.2 m; 25 m bionic tower bottom is apart from the ground 10.4 m, each layer interval 1.2 m; According to the construction site conditions and requirements according to the actual implementation.

5. Use the material such as glass fiber reinforced plastic or silicon rubber bark (manufacturers need to reply the specific use which material), surface texture to be realistic, hot dip galvanized coating on the surface of FRP spray increase environmental imitation raw lacquer. Color for bionic brown/brown camouflage, and can be customized according to the requirements of customers; Leaf shape available coniferous or broad-leaved two kinds, according to the actual implementation according to the construction site condition and requirement.

6. The bark to the internal steel pipe coating, completely guarantee and steel tube of glue sex, prevent leakage of rain;

7. The simulation leaves to use PVC or PE material, colour and modelling and surrounding trees, to 15 m leaves a big 11 layers, 20 m leaf layer is not less than 16, 25 m leaf is not less than 21 layer, and can be customized according to the requirements of customers;

8. Rod body with climbing device, communication pole bionic tower ladder: bionic tower communication pole set the ladder 2 meters, the ladder spacing is not more than 400 mm, convenient to maintenance personnel to climb.